Lehi Water Heater Repair
A white tank water heater in a metal drain pan on a concrete basement floor, with an expansion tank, insulated copper pipes and ductwork overhead (illustrative photo)

Water Heater Prices in Lehi, UT

Wondering what a water heater costs in Lehi? Here are the national ranges, a Utah average and what moves the price. Then call or text for your own number.

Updated Prices checked

  • National ranges and a Utah average
  • Price before any work starts
  • Gas rebates currently listed

Water heater trouble?

Water heater trouble? Tell me what's going on, and I'll get right back to you.

* required

!Please enter your name.
!Please enter a 10-digit phone number.

Answered 24/7. Rather talk? Call or text (385) 336-3299.

A water heater in Lehi costs more than the unit on a shelf. Utah regulates the gas models sold in the valley, the elevation is about 4,500 feet, the code asks for earthquake strapping, and a permit goes with the swap.

Below are the national average ranges, the one Utah reference figure, what pushes a bid up or down, how the permit and rebates fit in, and a checklist for reading any quote. When you're ready for a real number, call or text the line at the top of this page.

What do tank, tankless and repair jobs cost on average?

These are national averages, not Lehi prices. They show the band a fair quote usually falls in, and the sources are listed at the bottom of this page.

$1,000–$3,400

Standard tank, installed (national average)

$1,625–$4,500

Tankless heater, installed (national average)

$200–$850

Repair visit, about $550 on average (national)

Tank size moves the price more than most people expect. The national averages for the two sizes priced most often:

Tank sizeNational average, installed
40-gallon$700–$2,650
50-gallon$750–$2,800

The sizing guide covers how to tell which size your household needs.

What does a water heater cost in Utah?

HomeServe's Utah cost guide reports an average tank replacement of $1,537 (opens in a new tab), about 10% above its national figure. The same page puts a typical repair near $455 and a diagnosis near $124. The page carries no date, and it covers tank models, so treat it as a reference point.

$1,537

Average tank replacement reported for Utah

$455

Average repair reported for Utah

$124

Average diagnosis reported for Utah

Tankless pricing sits above tank pricing, and the tankless cost guide explains why.

What moves the price in Lehi?

Seven things decide where a Lehi job lands. Ask about each one when you compare bids.

  • Tank size: a larger household needs a larger tank, and a bigger tank costs more to buy and to haul.
  • Gas or electric: switching fuels means new gas piping or a new circuit, which changes the labor.
  • Ultra-low-nitrogen oxides (NOx) models: Lehi sits inside the zone where Utah requires them on gas heaters up to 75,000 BTU/hr, so the price must reflect a compliant unit.
  • Altitude: whether a gas unit needs any adjustment depends on the manufacturer and model, so the plumber checks the nameplate and manual.
  • Location: a basement, a closet or a cramped crawl space takes longer than a clear garage wall.
  • Code parts: strapping, a drain pan, a relief-valve discharge pipe and, where the cold supply is closed, an expansion tank.
  • Pressure: some Lehi areas sit at high water pressure, so a pressure-reducing valve is common, and that makes an expansion tank a real need.

Want a figure for your own house? Phone or text and describe the heater.

(385) 336-3299Talk to a plumber 24/7Text Us

What do repairs usually cost?

A repair price depends on which part failed and how old the tank is. The national averages by part:

RepairNational averageUsual symptom
Thermostat$125–$275water too hot, too cold or erratic
Heating element$150–$325lukewarm water on an electric tank
Thermocouple$125–$250a gas pilot that won't stay lit
Pilot or igniter$50–$175a gas burner that won't light
Temperature and pressure relief valve$35–$250dripping near the top
Gas control valve$250–$450no flame at all on a gas tank
Anode rod$100–$250rusty or smelly hot water

Water at the base of the tank is the exception: no part fixes a failed tank, so it means replacement. Age matters as much as the part. Tanks typically last 8 to 12 years, so a costly repair on a tank at that point rarely pays off. The water heater repair page covers how that decision is made.

What do code parts and upkeep cost?

The national averages for the parts and maintenance that cheap quotes tend to leave out:

ItemNational averageNotes
Expansion tank, installed$225–$625replaced every 5–10 years
Tank flush$100–$225clears sediment from the tank floor
Tankless descale$110–$275clears scale from the heat exchanger

How do the permit and licensing affect cost?

A water heater replacement is permitted work under Utah's construction code, and the licensed plumber doing the job normally pulls the permit and books the inspection. Lehi's building department takes inspections by phone only, with 24 hours' notice.

Lehi's published fee schedule has no separate water-heater line, and its building permit fees follow project value. That's why the permit belongs on your quote as an itemized line instead of buried in a total.

Licensing is part of the price conversation too. Utah lets unlicensed people take on some small jobs, but plumbing work on them must still be done by a licensed plumber. Ask for the license, then check it with the Utah Division of Professional Licensing (opens in a new tab).

What should a fair quote list?

A fair replacement quote names every piece of the job, so nothing arrives as a surprise on the day.

  • The new water heater, with size, fuel and model named
  • The permit and the inspection
  • Taking the old tank out and hauling it off
  • Connectors, shutoff valves and the gas or electrical connection
  • Earthquake strapping, a drain pan and a correctly piped relief valve
  • An expansion tank where your supply is closed
  • Venting checked, start-up and the thermostat left at 120°F, the usual safe setting

Optional extras, priced on their own: a water softener, a recirculating pump, a leak sensor or a switch to tankless.

Why do two Lehi quotes for the same house differ?

Mostly because they don't describe the same job. Compare what is in each, not only the total.

  • Scope: one bid is a bare swap, another includes every code part.
  • Fuel line: a new gas line or a larger circuit is real work that a simple bid may leave out.
  • Model: a compliant gas model and a lower-grade unit are not the same product.
  • Access: a heater above a finished ceiling costs more to reach than one in a garage.
  • Warranty: longer coverage costs more, and shops price overhead differently.

Are there rebates for a Lehi water heater?

Gas customers have the clearest option. Enbridge's ThermWise program currently lists $100 for an ENERGY STAR gas storage water heater and $300 for a gas tankless model. It also lists $350 for a gas condensing storage model and $50 for a smart controller. A request must be postmarked within 6 months of installation, and the page is undated, so confirm the amounts on ThermWise (opens in a new tab) before you buy.

Electric customers fare worse on paper. Lehi's rebate page (opens in a new tab) sends electric water heaters to a regional program and shows no dollar amount, so don't count on one until the program confirms it.

Done reading? The number up top gets you a quote that fits your tank.

(385) 336-3299Talk to a plumber 24/7Text Us

Pricing questions

Is there a published price list for Lehi?

No. No Lehi plumber or agency publishes one, so this page shows national average ranges, one Utah average and what moves a price. Ask for the figure on your own heater before any work starts.

Are these the prices I'll pay in Lehi?

Not exactly. They're national averages and one Utah average, shown so you can tell whether a quote sits in a normal band. Your price depends on the heater, the fuel, where it sits and the code parts your house needs.

Why would one quote run higher than another for the same house?

Usually the quotes cover different jobs. One may include the permit, strapping, a drain pan and removal of the old tank, while another adds them on the day. Compare line by line.

Does Lehi charge a permit fee for a water heater?

Lehi's published fee schedule has no separate water-heater line, and building permits there are priced by project value. Ask for the permit to appear as its own line on your price.

Are rebates available on a Lehi water heater?

Enbridge's ThermWise program currently lists rebates on qualifying gas water heaters, such as $100 for an ENERGY STAR gas storage model and $300 for gas tankless. Lehi City Power points electric customers to a regional program but publishes no amount.

What should I have ready when I ask for a price?

The fuel, the tank size from the label, where the heater sits and roughly how old it is. A repair usually needs the fault found before a firm figure is possible.

Where these ranges come from

Each national average on this site takes the low and high ends of three national cost guides, Angi (opens in a new tab), HomeGuide (opens in a new tab) and Forbes Home (opens in a new tab), averages them and rounds the result. The guides were read in September 2026, and the figures are national, not specific to Utah.

The Utah average comes from HomeServe's Utah water heater cost guide, checked in November 2026. Rebate amounts come from Enbridge's ThermWise page and Lehi City's own pages, checked the same month. None of this is a quote for your house; you'll hear the real price before any work starts.

Last updated:

Text Lehi Water Heater Repair

Tell me what's going on with your water heater, and I'll get right back to you.

* required

!Please enter your name.
!Please enter a 10-digit phone number.

Rather talk? Call or text (385) 336-3299.